125 Models (Clutches and brakes)

Specifications

Downloads

125-□-12G

[Specifications]

Model	Size	Dynamic friction torque Td ［N・m］	Static friction torque Ts ［N・m］	Coil (at 20℃)				Heat resistance class	Max. rotation speed ［min^-1］	Rotating part moment of inertia J ［kg・m²］	Total work performed until readjustment of the air gap ET ［J］	Armature pull-in time ta ［s］	Torque build-up time tp ［s］	Torque decaying time td ［s］	Mass ［kg］
Model	Size	Dynamic friction torque Td ［N・m］	Static friction torque Ts ［N・m］	Voltage ［V］	Wattage ［W］	Current ［A］	Resistance ［Ω］	Heat resistance class	Max. rotation speed ［min^-1］	Rotating part moment of inertia J ［kg・m²］		Armature pull-in time ta ［s］	Torque build-up time tp ［s］	Torque decaying time td ［s］	Mass ［kg］
125-05-12G	05	2.4	－	24 DC	10	0.42	58	B	3000	2.4×10^-5	9×10⁶	C: 0.012/B: 0.010	C: 0.031/B: 0.023	C: 0.040/B: 0.012	1.2
125-06-12G	06	5	5.5	24 DC	11	0.46	52	B	3000	1.28×10^-4	36×10⁶	C: 0.020/B: 0.015	C: 0.041/B: 0.033	C: 0.020/B: 0.015	2.1
125-08-12G	08	10	11	24 DC	15	0.63	38	B	3000	3.70×10^-4	60×10⁶	C: 0.023/B: 0.016	C: 0.051/B: 0.042	C: 0.030/B: 0.025	4.2
125-10-12G	10	20	22	24 DC	20	0.83	29	B	3000	1.40×10^-3	130×10⁶	C: 0.025/B: 0.018	C: 0.063/B: 0.056	C: 0.050/B: 0.030	6.8
125-12-12G	12	40	45	24 DC	25	1.04	23	B	3000	3.85×10^-3	250×10⁶	C: 0.040/B: 0.027	C: 0.115/B: 0.090	C: 0.065/B: 0.050	12
125-16-12G	16	80	90	24 DC	35	1.46	16	B	3000	1.35×10^-2	470×10⁶	C: 0.050/B: 0.035	C: 0.160/B: 0.127	C: 0.085/B: 0.055	22

*The dynamic friction torque, Td, is measured at a relative speed of 100 min-1. Depending on the initial torque characteristics, break-in to condition the engaging surfaces may also be required.

[Dimensions]

[Dimensions 1]

Size	Dimensions of part															Dimensions of shaft
Size	A1	A2	B1	B2	C	D	E	F	G	H	J	K	L	Z1	Z2	Q	S	U	V	W
06	65	90	90	105	65	100	27.5	61	2.6	115	48.5	132	187	13.5	6.5	25	11	12.5	M4×0.7, length: 8	4
08	80	110	110	130	80	125	32.5	72	3.2	142.5	63	171	236	15.5	9	30	14	16	M4×0.7, length: 8	5
10	105	135	140	160	90	150	35	81	3.2	165	80	210	295	20	11.5	40	19	21	M6×1, length: 11	5
12	135	160	175	185	112	190	42.5	97	4.5	207	108	270	376	24.5	11.5	50	24	27	M6×1, length: 11	7
16	155	200	200	230	132	230	45	109	6	247	145	362	490	28	14	60	28	31	M6×1, length: 11	7

*The input/output shaft keyways are old JIS standard class 2 while the key is old JIS standard class 1.

*When inserting pulleys or the like onto input/output shafts, use the supplied insertion set.

125-□-12EG,*Made to order

[Specifications]

Model	Size	Dynamic friction torque Td ［N・m］	Static friction torque Ts ［N・m］	Coil (at 20℃)				Heat resistance class	Max. rotation speed ［min^-1］	Rotating part moment of inertia J ［kg・m²］	Total work performed until readjustment of the air gap ET ［J］	Armature pull-in time ta ［s］	Torque rise time tp ［s］	Torque extinction time td ［s］	Mass ［kg］
Model	Size	Dynamic friction torque Td ［N・m］	Static friction torque Ts ［N・m］	Voltage ［V］	Wattage ［W］	Current ［A］	Resistance ［Ω］	Heat resistance class	Max. rotation speed ［min^-1］	Rotating part moment of inertia J ［kg・m²］		Armature pull-in time ta ［s］	Torque rise time tp ［s］	Torque extinction time td ［s］	Mass ［kg］
125-06-12EG	06	5	5.5	24 DC	11	0.46	52	B	3000	1.28×10^-4	36×10⁶	C: 0.020/B: 0.015	C: 0.041/B: 0.033	C: 0.020/B: 0.015	2.1
125-08-12EG	08	10	11	24 DC	15	0.63	38	B	3000	3.70×10^-4	60×10⁶	C: 0.023/B: 0.016	C: 0.051/B: 0.042	C: 0.030/B: 0.025	4.2
125-10-12EG	10	20	22	24 DC	20	0.83	29	B	3000	1.40×10^-3	130×10⁶	C: 0.025/B: 0.018	C: 0.063/B: 0.056	C: 0.050/B: 0.030	6.8
125-12-12EG	12	40	45	24 DC	25	1.04	23	B	3000	3.85×10^-3	250×10⁶	C: 0.040/B: 0.027	C: 0.115/B: 0.090	C: 0.065/B: 0.050	12
125-16-12EG	16	80	90	24 DC	35	1.46	16	B	3000	1.35×10^-2	470×10⁶	C: 0.050/B: 0.035	C: 0.160/B: 0.127	C: 0.085/B: 0.055	22

*The dynamic friction torque, Td, is measured at a relative speed of 100 min-1. Depending on the initial torque characteristics, break-in to condition the engaging surfaces may also be required.

[Dimensions]

Size	Dimensions of part															Dimensions of shaft
Size	A1	A2	B1	B2	C	D	E	F	G	H	J	K	L	Z1	Z2	Q	S	U	V	W
06	65	90	90	105	65	100	27.5	61	10	115	48.5	132	187	13.5	6.5	25	11	12.5	M4×0.7, length: 8	4
08	80	110	110	130	80	125	32.5	72	12	142.5	63	171	236	15.5	9	30	14	16	M4×0.7, length: 8	5
10	105	135	140	160	90	150	35	81	15	165	80	210	295	20	11.5	40	19	21	M6×1, length: 11	5
12	135	160	175	185	112	190	42.5	97	15	207	108	270	376	24.5	11.5	50	24	27	M6×1, length: 11	7
16	155	200	200	230	132	230	45	109	18	247	145	362	490	28	14	60	28	31	M6×1, length: 11	7
20	195	240	240	270	160	290	47.5	124	20	305	188	448	616	28	14	80	38	41.5	M10×1.5, length: 17	10

*The input/output shaft keyways are old JIS standard class 2 while the key is old JIS standard class 1.

*When inserting pulleys or the like onto input/output shafts, use the supplied insertion set.